Basic Info.
Type
Volumetric Filling Machine
Packaging Container Lifting Structure
Packaging Material
Composite Materials
Name
3 in 1 Machine for Glass Bottle
Transport Package
Wooden Packaging
Product Description
Introduction:
The series of equipment combines the rinsing, filling, sealing functions on the same machine. The design of the machine is scientific and reasonable .The appearance is beautiful and the function is complete. Its operation and maintenance is convenient. And its automation is high. The whole machine is controlled by PLC with touch-screen as the interface between human and machine .The amount of the drinks in the drink tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle .When bottles are cramped wrongly or when caps are not available, the machine can be stopped automatically.
Working principle :
Bottle rinsing part
This part is made up of lifting device, the main transmission device, the fixed frame, clamp device, distributor, and open clamp cams and over turn cams etc.
Lifting device is used to adjust the height of the rotary tables and clamps of machine to adapt to the bottle height. Its power comes from the lifting lever. Lever rotates drive screw rotation to realize the rotary tables lift.
When the clamp rotate to star wheel with rotating table, bottle into the middle of clamp, open clamp cam close the clip claw and clip the bottleneck with the rotating clamp. When rotary tables to rotate, clamp pieces will rotate with over turn cam, guide cams rotates around over turn cam and flip the bottleneck to 180 degree till the bottle mouth is top downwards and directly face the spray nozzle, then the clean water in the spray nozzle sprays and wash the inside of the bottle, Drain, turn 180 degree downwards and then goes out from the star wheel.
Filling part
Beer filling machine is specially designed according to the beer feature, and the filling part is designed to be twice pre-evacuation.
The filling part is made up of main liquid pipe, rotating cylinder bearing base, filling cylinder fulcrum loop, wine or carbonated drink tank, filling valve, filling cylinder pipe, control loop device, ascending device, the distributor, height adjusting control, stimulating bubble arm, vacuum system, etc.
a. The first Vacuumize
Open the Vacuum valve stem, in the bottle and vacuum channels forming a road. The air in the bottle will be discharged from bottle through this channel, in the bottle will form a vacuum. After reach the fixed time, Vacuum valve closed, then it will be finished.
b. Gas injection
Open the filling valve, a pathway is formed between the bottle and the gas channel. The gas filling into the bottle through this channel till gas pressure in wine tank equals to the beer tank pressure.
c. The second vacuumizing
After gas injection into the bottles, little air will be concentrated on the top of the bottle neck. By the second vacuumizing, this part of resting air will be removed and generate a slight-vacuum state, which is better for the filling work.
d. Wine or carbonated drink filling
Open liquid valve and form pathway between the bottle and the beer tank, the material will feed into the bottle from this channel, at the same time, the CO2 in bottle return back to the beer tank at the same speed through air-back pipe. Compressed CO2 in the bottle seal material to continue to run till the material in bottle rising over air-back pipe and form pressure balance
e. Close valve
After the bottle finish filling stand for long time, close the liquor valves and air filling valves, cut off the channel between wine tank and bottle.
f. Air discharge
Open the discharge valves and form a pathway between bottle and air. The pressure in bottle will release through this channel and don't finish release until bottle separate from filling parts.
g. Blow remaining liquid
When the filling parts locates between bottle-out and bottle-in star wheel, open the gas filling valves and close it after reach the fixed time. So that the gas in bottle will blow the remaining liquid.
Capping part
The capping machine is made up of cap holder, capping slideway, capping upper part, capping lower part, elevating part and anti-circling column.
The up and down movement of the capping nozzle is driven by the capping cam, which is fixed. The screw or crown caps (one machine can only has one kind of capping part) are sending to the cap slideway by a mixer in the cap container, and then slid to the capping mould of the capping nozzle. The capping nozzle is driven by power and move in circle. The capping nozzle would move upword and downward one time in each circle of the capping. The cam, set up in the upper fixed part of the capping machine, controls the upward and downward movement of the capping nozzle.
After the bottle is transmitted from the filling machine, the capping nozzles have been fed with a bottle cap. The capping nozzles moves downwards the bottle under the capping platform driven by cam guideway, then the bottle cap with the aid of the damping ring.
Model | PXGFD18186 | PXGFD24248 | PXGFD32328 | PXGFD404010 | PXGFD505012 |
Capacity(B/H) | 3000-4000 | 5000-6000 | 7000-8000 | 8000-9000 | 9000-11000 |
Heads of rising,filling&,capping | 18-18-6 | 24-24-8 | 32-32-8 | 40-40-10 | 50-50-12 |
Suitable bottle height(mm) | 160-340 |
Suitable bottle diameter(mm) | φ50-φ100 |
Wash water pressure(Mpa) | 0.25-0.3 |
Filling way | Pressure equality filling&Two times vacuumized |
Filling temperature(ºC) | 0-5 |
Filling pressure(Mpa) | 0.15-0.5 |
Main Power(kw) | 3 | 4 | 7.5 | 11 | |
Total power(kw) | 3.18 | 4.18 | 7.68 | | |
Overall dimensions(mm) | 3010*2010*3260 | 3280*2420*3200 | 4430*2880*3200 | 4650*3200*3200 | 4987*3846*3200 |
Weight(kg) | 3800 | 5000 | 6800 | 8800 | 11000 |
Address:
Leyu Industrial Estate, Zhangjiagang City, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Zhangjiagang City Modern Beverage Packing Machine Co., Ltd. is a collection development, research, design, production and technical services and marketing into one professional engaged in the manufacture of mechanical equipment packages beverages, food packaging machinery equipment, high-tech enterprises. Companies have excellent development and design system experienced technical team, continually introducing Italy, and Germany abroad latest beverage packaging machine games, focusing on the reliability of the overall performance, development and improvement of their own products.
Our company mangaerial concept is "cooperate honestly, base on the credit, be superior in quality". We would like to cooperate with all old and new customers to co-develop, establish long-term stable business relationship, and make a bright future together.
Provide long-term mineral water, pure water (bpd) gasoline production lines on a tea, juice beverages hot, cold beverage production lines on a carbonic acid beverages bottled production line on a beverage tastes gasoline production lines on a purely Shengpijiu gasoline production lines on a yellow wine and white spirit, wine beverage production lines and various ancillary equipment, and the turnkey contract works.